Align Technology iTero Element 5D Скачать руководство пользователя страница 46

Страница: 46 / 246

2.2

Assembling the iTero Element 5D laptop configuration scanner

Follow the instructions below to assemble the iTero Element 5D laptop configuration scanner. Afterwards, install
the iTero software, as described in

Installing the iTero Element 5D software – laptop configuration

Hub and hub power cable

Cradle

Wand and wand cable

USB cable to connect laptop
and hub

1. Place the wand in the cradle

2. Connect the hub power cable to

the hub.

3. Connect the USB cable to the

hub.

4. Connect the USB cable to the

laptop.

5. Connect the wand cable to the

hub.

6. Plug the hub power cable into

the AC power outlet.

Notes:

The hub must be connected to an AC wall outlet at all times.

The laptop should be connected to an AC wall outlet during intraoral scanning.

2.2.1

Installing the iTero Element 5D software – laptop configuration

New iTero Element 5D wheel-stand configuration systems come with the software installed, but the user must
install the software on iTero Element 5D laptop configuration systems.

Notes:

Before installing the iTero software, please install all available Windows updates. New Windows computers
should apply the updates automatically.

Ensure that one of the following compatible antivirus programs has been installed: Norton, McAfee, or ESET.

iTero Element 5D and iTero Element 5D Plus imaging systems User manual

Содержание iTero Element 5D





















































































































































































































































Результаты поиска

Содержание iTero Element 5D

Отзывы:

Бренды по названию

Популярные бренды

Align Technology iTero Element 5D, Руководство пользователя

Результаты поиска

Содержание iTero Element 5D

Отзывы:

Бренды по названию

Популярные бренды