Alienware X51, Руководство по обслуживанию

Страница: 18 / 55

Replacing the processor
cooling assembly
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Place the processor cooler over the processor on the system board.
2 Align the screw holes on the processor cooler with the screw holes on the
system board.
3 Replace the thumbscrews that secure the processor cooler to the system
board.
4 Align and place the radiator on the processor cooler and slide towards the
back of the computer.
5
Replace the screws that secure the radiator to the chassis..
6 Replace the memory modules .
7
Align and place the fan on the processor cooling assembly.
8 Route the fan cable and processor-cooler cable through the routing guide
on the chassis.
9 Connect the fan cable and processor-cooler cable to the system board.
Post-requisites
Replace the side panel .
18