About this task
The following image(s) indicate the location of the rear I/O-cover and provides a visual representation of the installation procedure.
Steps
1. With the correct orientation, slide the rear I/O-cover into the palm-rest and keyboard assembly, and snap it into place.
2. Replace the two screws (M2.5x6.5) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
Before working inside your computer
2. Remove the
3. Remove the
27
