Alienware DHS 3 Upgrade User’s Guide
17
Step 1.
Step 1: Locate the LCD in front of the chassis.
Step 2.
Next make sure you’re in Windows before checking the LCD.
Once you verify you are in Windows look at the LCD and
make sure you can see the information it displays.
If you’re LCD displays the below information when in Windows
then this means your drivers and software installed are working
correctly. You can stop and your installation is now complete.
If you’re LCD displays the below information when in Windows
then this means your drivers and software are not installed or
working correctly. You can proceed to Step 3
Step 3.
Shut down your system completely, this does not mean
restart. You will have to choose shut down by going to Start
Æ
Turn Off Computer
Æ
Turn Off
Step 4.
Turn on the system, once you are in Windows you should
see the below image.
4-1. Make sure “No, not this time” is checked and then hit Next.
Содержание DHS 3
Страница 1: ...Alienware DHS 3 Upgrade User s Guide 1...