30 | Setting up the monitor
Removing the monitor stand
NOTE: To prevent scratches on the display when removing the stand,
ensure that the monitor is placed on a soft, clean surface.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up instructions
that were included with the stand.
To remove the stand:
1.
Turn off the monitor.
2.
Disconnect the cables from the computer.
3.
Place the monitor on a soft cloth or cushion.
4.
Carefully slide and remove the I/O cover from the monitor.
5.
Disconnect the cables from the monitor and slide them out through the
cable-management slot on the stand riser.
