background image

UPMIDIAS

Replacing 

the 

Speakers  |  

81

Replacing the Speakers

 

WARNING:  

Before working inside your computer, read the safety 

information that shipped with your computer and follow the steps in 
"Before You Begin" on page 11
. For additional safety best practices 
information, see the Regulatory Compliance Homepage at 

 

dell.com/regulatory_compliance.

Procedure

1

Align the screw holes on the speakers with the screw holes on the computer base 
and replace the screws that secure the speakers to the computer base.

2

Route the speakers cable through the routing guides on the computer base and then 
connect the speakers cable to its connector on the system board.

Postrequisites

1

Follow the instructions from step 3 to step 6 in Replacing the Palm Rest.

2

Replace the optical drive. See "Replacing the Optical Drive" on page 24.

3

Replace the hard drive(s). See “Replacing the Hard Drive(s)” on page 28.

4

Replace the battery pack. See "Replacing the Battery Pack" on page 17.

5

Replace the fans cover. See "Replacing the Fans Cover" on page 30.

6

Replace the base cover. See "Replacing the Base Cover" on page 15.

7

Replace any card or blank that you removed from the Media-Card Reader.

8

Follow the instructions in "After Working Inside Your Computer" on page 13.

Book.book  Page 81  Friday, June 28, 2013  11:10 AM

Содержание 18 P19E


























































































































Отзывы: