matters needing attention
Emergency stop button
Intelligent tooth shape recognition
Cutting collecting box
Instructions for use of cutting collection box:
1.When the cutting waste needs to be treated, it can be directly
pulled out of the lower cutting collection box and the waste can
be poured out;
2.When storing, directly aim at the mouth and push forward.
The distance between user and products should be no less than 20cm.
Instructions for use of emergency stop button:
1.When an emergency occurs or the key processing is finished, the
power supply can be cut off by directly pressing the knob vertical-
ly;
2.According to the direction of the arrow, turn the knob clockwise
about 45 degrees to turn on the power supply of the device.
Instructions for intelligent tooth shape recognition:
1.Insert the key into the fixing hole;
2.On the screen, check whether the key embryo is deviated great-
ly; if it is skewed, the key position can be adjusted left and right;
3.After reading the key sequence, pull out the key directly.
Please read the product operation manual carefully before use;
Wear safety goggles in accordance with ANSI standard when
working;
Do not put your hand into the working area when the machine
is running;
Keep children away from the machine;
When not in use for a long time, please cut off the power
supply;
Ensure that there is no chip residue during packaging and
transportation;
Do not use air jet gun and other tools to clean the chips;
Manufacturer:Wuxi Keyoung Electronic Technology Co., Ltd
QQ:3004280989
WEB:www.kydz-wx.com
Address:5-302,5-301 Huaqing Creative Park,Huishan Economic
Development Zone, Wuxi, Jiangsu
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Please keep the worktable clean;
This machine has built-in lithium battery pack. Please do not
disassemble it without permission. Keep the machine away
from high temperature and fire source
The machine should be placed in the area of light proof, rain
proof and waterproof.
