Alien ALR-M702 Скачать руководство пользователя страница 2

 

Legal Notices 

 
Copyright ©2019 Alien Technology, LLC. All rights reserved.  
 
Alien Technology, LLC and/or its affiliated companies have intellectual property rights relating to technology embodied in the 
products described in this document, including without limitation certain patents or patent pending applications in the U.S. or other 
countries. 
 
This document and the products to which it pertains are distributed under licenses restricting their use, copying, distribution and 
decompilation. No part of this product documentation may be reproduced in any form or by any means without the prior written 
consent of Alien Technology, LLC and its licensors, if any. Third party software is copyrighted and licensed from Licensors. Alien, 
Alien Technology, the Alien logo, Nanoblock, FSA, Gen2Ready, Squiggle, the Squiggle logo, Nanoscanner and other graphics, 
logos, and service names used in this document are trademarks of Alien Technology, LLC and/or its affiliated companies in the U.S. 
and other countries. All other trademarks are the property of their respective owners. U.S. Government approval required when 
exporting the product described in this documentation. 
 
Federal Acquisitions: Commercial Software -- Government Users Subject to Standard License Terms and Conditions. U.S. 
Government: If this Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or 
subcontractor (at any tier), then the Government's rights in the Software and accompanying documentation shall be only as set forth 
in this license; this is in accordance with 48 C.F.R. 227.7201 through 227.7202-4 (for Department of Defense (DoD) acquisitions) 
and with 48 C.F.R. 2.101 and 12.212 (for non-DoD acquisitions). 
 
DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND 
WARANTEES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR 
NON-INFRINGMENT ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE 
LEGALLY INVALID. 
 

FCC Compliance 

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. Operation of this equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with instruction manual, may cause harmful interference with radio 
communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

Reorient or relocate the receiving antenna 

Increase the separation between the equipment and the receiver 

Connect the equipment to a different outlet than that to which the receiver is connected 

Consult the dealer or an experienced radio communications technician 

 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation. 
 
Any change or modification to this product voids the user’s authority to operate per FCC Part 15 Subpart A. Section 15.21 
regulations. 
 

Caution 

To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user’s body 
and the device, including the antenna.  This device is designed and manufactured not to exceed the emission limits for exposure to 
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. Use only the antenna 
defined in the integration guide.   
 

 

 

Содержание ALR-M702














Отзывы: