Instrument tour
R&S
®
NGL200/NGM200
20
Getting Started 1178.8720.02 ─ 07
5 = Power key
6 = USB connector
7 = Menu control keys
Display (1)
The display is a color TFT touch screen. Depending on the instrument model, up
to two channels are shown on the display. The respective measurement settings
and functions are displayed in the individual channel display area. There is a sta-
tus bar in the device level and channel level, showing the device operating mode
and respective channel settings of the instrument.
For a detailed description on-screen layout, see section "Display Overview" in the
User Manual.
Rotary knob and back key (2)
The rotary knob and back key are used for menu navigation and value adjustment
in the instrument.
For a detailed description on rotary knob and back key, see section "Navigation
Controls" in the User Manual.
Output and channel keys (3)
The channel key allows you to select the power supply channel to source or sink
power. The output key allows you to enable or disable the output power on the
channel key.
Refer to datasheet for the channel voltage/current limits in the source and sink
mode.
Output terminals (4)
Depending on the instrument type, one or two output channels are available to
source or sink power.
Both instrument models are equipped with 4 terminals. The R&S NGL201, R&S
NGM201 models provide both the output plus the sense connectors at the front
panel while the R&S NGL202, R&S NGM202 models provide only output termi-
nals for both channels.
Power key (5)
The [Power] key switches the instrument on and off.
Overview of controls
www.allice.de
Allice Messtechnik GmbH
