3
www.observint.com
© 2016, 2017 Observint Technologies. All rights reserved.
You can open the OSD menu system using the built-in joystick on the camera, from either the QVR Live
View display or through remote login to the ALIBI recorder.
Opening the OSD Menu using the joystick
The OSD joystick is located on the camera module near the CVBS video test connector (see page 1). The
joystick can be rocked up (toward the camera body - see below), down (away from the camera body),
left and right, and can be pressed in (down toward the back box). Use the OSD joystick is used to open the
OSD menu and navigate through the menus. The OSD menu tree is shown on “OSD Definitions: On-screen
Display (OSD) menus” on page 4.
UP
•
To open the OSD menus and select a menu option, press the joystick in (down toward the back box).
•
To navigate the menus, rock the joystick up (UP (
p
), see photo above) or down (
q
) to move
through the parameter list menus vertically.
•
Rock the joystick left (
t
) or right (
u
) to change the parameter value that appears for the parameter.
•
Press the joystick in (down toward the back box) to select the parameter value shown. Changes made
to the OSD setup must be saved to be restored after power off and power on.
Opening the OSD Menu through the QVR
To open the OSD menu on the QVR monitor:
1.
Open the QVR Live View screen, and then click inside the screen where the PTZ camera video image
is displayed. See below.
2.
Click the
PTZ Control
icon in the Quick Setting Toolbar. The PTZ camera Live View window will
expand to full screen and the pop-up window shown below will open.
Menu
icon
3.
In the
PTZ Control
panel pop-up window, click the
Menu
icon on the
Configuration
line.
4.
Drag the PTZ Control window to a position where it doesn’t cover the OSD menu (such as the left
side).
NOTE
The PTZ Control window direction buttons and the
Iris +
and
Iris
-
keys are used to navigate the
OSD menu and set configuration options in the camera. See “OSD Definitions: On-screen Display
(OSD) menus” on page 4.
Opening the OSD Menu through remote login to the QVR
To open the OSD menu during a remote login to the recorder:
1.
After logging into the QVR, open the camera in a single Live View window.
2.
In the PTZ control panel, scroll down the Preset list to
Preset95
, click the entry to highlight it, and
then click the
Call
icon. See below. The OSD
MAIN MENU
screen will open.
PTZ control panel
Preset95
Call
icon
NOTE
The PTZ control panel direction buttons and the
Iris +
and
Iris -
keys are used to navigate the
OSD menu and set configuration options in the camera.
