ALIBI ALI-NVR7232R Скачать руководство пользователя страница 1

1

ALI-NVR7232R_RQ  

180717

Bay 1 with HDD

Release button on side

Release button on side

Bay 8

Bay 2

Bay 7

Front accessible HDD bays (front panel open)

For information about using your NVR and its extensive capabilities, refer to the 

Alibi Embedded Network Video Recorder Firmware 

V3.4.95 (or later) User Manual

 provided a

www.alibisecurity.com/resources

.  

NVR Back Panel

LAN (2) 

RS-485, Alarms IN / OUT 

Power connector 

Fan outlet

ON / OFF switch

VGA1, HDMI1 

Video Out

HDMI2, VGA2  

Video Out

Audio LINE IN

Audio LINE 

OUT 1, 2

Ground

RS-232

USB 3.0

eSATA

Item

Description

eSATA

Connects external SATA HDD, CD / DVD-RM

RS-485, Alarms IN / OUT

See topic below. 

Power connector

AC 100V ~ 240V power supply.

Audio LINE IN 

RCA connector for audio line level input. 

Audio LINE OUT 1, 2 

RCA connectors for audio line level outputs. 

RS-232 Interface

Connector for RS-232 devices.

VGA1, VGA2

DB9 connectors for VGA output 1, 2. Displays local video output and menus. VGA1 and VGA2 have different output format options.

HDMI1, HDMI2

HDMI video output 1, 2 connectors. HDMI1 and HDMI2 have different output format options.

USB 3.0 interface

Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).

LAN Interface (2)

10 / 100 / 1000BASE-T network interfaces

GROUND

Ground (must be connected when NVR starts up)

ON / OFF switch

Switch for powering on / off the device.

This quick setup guide provides instructions to initially setup and use the ALI-NVR7232R network video recorder (NVR). 

ALI-NVR7232R front panel 

This recorder features: 

• 

Eight front-loaded HDD bays (HDDs not included)

• 

HDDs are hot-swapable

• 

Supports for up to 32 IP cameras

NVR Front Panel

1 .. 16 when lit, channel is active

Backup / Export active

Lock

USB 2.0 ports (2)

Power button

Not used

Front panel controls and indicators 

Name

Function Description

Status Indicators

POWER

Unit is powered on. 

ALARM

Turns red when a sensor alarm is detected.

TX/RX

Flashes when network connection is functioning properly.

HDD

Flashes red when data is being read from or written to HDD.

READY

Ready LED is normally blue, indicating that the device is functioning properly.

ARCHIVE

Lit when a video backup / export operation is active. 

1 .. 16

Channel Status indicator. Lit when channel is active. 

USB 2.0 ports (2)

Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).

ALI-NVR7232R Embedded Network Video Recorder Quick Setup Guide

www.Observint.com

Содержание ALI-NVR7232R











Отзывы: