ALIBI ALI-NS7004R, Руководство по установке

Страница: 19 / 39

13 ALI-NS7004R IP PTZ Camera Installation Guide
1. Determine the best mounting screws and hardware to anchor the mounting bracket with the camera to the mounting surface.
Use the following guidelines:
—
For cement wall mounting, use the expansion screw to anchor the bracket.
—
For wooden wall mounting, use self-tapping screw to anchor the bracket.
—
Make sure that the wall is strong enough to withstand more than 8 times the weight of the camera and the bracket.
2. Using the mounting bracket as a template, mark the location of the mounting screw holes on the wall. Also mark the location
of a hole for the camera drop cable and cables to accessories. Cables are routed through the mounting bracket to either
through the wall or through the cable channel at the bottom of the bracket.
3. Drill holes in the wall for the mounting screws (or bolts). Also, drill a 1½” diameter hole in the wall for the drop cable and other
cables, if needed.
Bolts or expansion
screws (4)
4. Clip the safety cable to the loop on the camera mounting bracket.
5. Route the camera drop cable through the mounting bracket.
6. Route the drop cable through the mounting surface, or through the cable channel at the bottom of the bracket, as preferred,
and then secure the mounting bracket, with the camera to the wall.
Drop cable
Pin
Coupling
with slot
Safety cable
Retention screw (2)
SECTION 2: INSTALLATION