background image

1

www.observint.com

ALI-NS1012VR_CQ 

10/9/2015

12 Vdc Power  

connector  

Ethernet connector -   

PoE capable

Camera drop cable connectors 

What’s in the box

Box contains this document with the items shown below. 

Drill Template

Documentation and  

Installation Tools CD

Weatherproof fitting  

for Ethernet cable 

L-wrench

Mounting 

screws and  

wall inserts

This product also includes a junction box adapter plate for attaching the camera assembly onto a junction 
box. 

Step 1.  Install the camera

1. 

Determine the best fasteners for securing the camera to mounting surface. The mounting hardware 
provided is suitable for most surfaces. 

NOTE

: A mounting plate adapter is provided for attaching the 

camera to a junction box. 

2. 

Using the Drill Template 
provided, mark the location 
of the mounting screw holes. 
If the drop cable will be 
routed through the mounting 
surface, mark the location of 
the hole for the cable. 

NOTE

The drop cable can be routed 
through the cable channel on 
the side of the base. 

3. 

Drill holes for the mounting 
fasteners, and for the drop 
cable if needed. 

4. 

Remove the three lower 
dome screws, then separate 
the lower dome from the 
mounting base. An L-wrench 
is provided. 

5. 

Route the drop cable as 
planned, then secure the 
mounting base to the surface 
with the fasteners.

Mounting  

screw holes

Wall inserts

Mounting 

base

Mounting 

screws

Drop 

cable

6. 

DO NOT reattach the lower dome to the mounting base at this time.  

Step 2.  Connect the camera to the LAN and power it on

1. 

Route a Ethernet LAN drop cable to the camera and plug it into the Ethernet connector. Seal the 
connection from moisture and other contamination. A weatherproof fitting is provided. 
If the camera is powered through the LAN cable (PoE), apply power to the cable to power on the 
camera, then continue to “Step 3. Install the Alibi Discovery Tool” on page 2. 

ALI-NS1012VR 2.1 Megapixel  

IP Dome Camera  

Quick Installation Guide

This document guides you through the basic steps to install and configure the ALI-NS1012VR camera. This 
camera features: 

• 

2.1 Megapixel 1/2.8 in. CMOS progressive scan sensor

• 

High definition video streaming with Dual-stream video support 

• 

Video stream compression: H.264 standard and MJPEG

• 

3D-DNR noise reduction and Digital Wide Dynamic Range (WDR)

• 

Backlight compensation 

• 

65 ft IR range for night vision 

• 

Dual power capable - Power over Ethernet (PoE) or 12 Vdc 

• 

Weatherproof - IP66 rated and Vandalproof - IK10 rated  

For more information about the features of these cameras, please refer to the 

ALIBI IP Camera Software 

V2 User Manual

.  

Mounting  

base

Dome  

Assembly

IR array

Lens

Gimbal 

 assembly

Drop 

cable

Camera module

Black plastic  

shield

Micro SD card slot

Reset button

ALI-NS1012VR camera without the dome cover

Отзывы: