ALIBI ALI-NP7022RT, Руководство по установке

Страница: 21 / 39

15 ALI-NP7022RT IP PTZ Camera Installation Guide
SECTION 2: INSTALLATION
2. Using the mounting bracket as a template, mark the location of the mounting screw holes on the ceiling.
3. Drill holes for the mounting screws and hardware. Also, drill a 1½" diameter hole in the mounting surface for the camera
extension cables.
4. Anchor the mounting bracket to the ceiling.
5. Clip the safety cable to the loop on the mounting bracket. Allow the camera to hang in place.
6. Open the top cover of the camera with the hex wrench provided. The camera drop cables are under the cover.
Camera top
cover open
Opening for
extension cables
7. Route the LAN and power cables (or LAN cable if using PoE), audio, microphone, alarm and RS-485 cables through the wall
mount bracket, and then through the top cover of the camera.
8. Connect the extension cables to the camera drop cables. Refer to “2.3.1 Connecting the cables” on page 12.
9. Reattach the camera top cover. Tighten the screws.
10. Fit the camera mounting bracket coupling into the mounting bracket.