4
www.observint.com
© 2015 Observint Technologies. All rights reserved.
NOTE
Some computer security software may attempt to block you from running
WebComponents.exe
.
If necessary, open the Internet Explorer downloads list, right click on the WebComponents.exe file
name, then click
Run Anyway
.
b.
In the
Setup - WebComponents
window opens, click
Next
to continue.
Installing the WebComponents plugin may require that you close the browser. Follow the
on-screen instructions, then restart your browser after the installation is finished.
c.
Allow the plug-in installation to complete. When the following window appears, click
Finish
.
After logging into the camera, the Live View - Main stream window will appear.
Capture, Record, Enable e-PTZ icons
Screen select tabs
Live View options
Logout button
Live View image
Step 5. Adjust the camera for your surveillance target
1.
While observing live video from your camera, unscrew the Pan, Tilt and Rotation lock screws
at least two turns using the security L-wrench provided, then move the camera to point at the
center of your surveillance target. Tighten the lock screws to hold the camera in position.
Pan lock screw - Pan: 0˚ ~ 360˚
Tilt lock screw
Tilt: 0˚ ~ 100˚
Rotation lock screw
Rotation: 0˚ ~ 360˚
Step 6. Setup the video image
The video Display Settings menu includes the image-related configurable parameters for the camera.
It contains several sub-menus such as Image Adjustment, Exposure Settings, Day/Night Switch, etc.
that can be opened or closed for compactness. Additionally, several adjustments can be seen in the
Live View image on the menu. To open the Display Settings menu, go to
Setup
tab
| Image | Display
Settings
Configurable parameters include:
•
Switch Day and Night
: Select either
Auto-Switch
or
Scheduled-Switch
.
—
If using
Auto-Switch
, open the
Day/Night Switch
submenu to select the Sensitivity,
Filtering Time, and Smart IR feature ON or OFF.
—
If using
Scheduled Switch
, set the
Start Time
and
End Time
of the switch, then open
the
Day/Night Switch
submenu to select the
Smart IR
feature ON or OFF.
Also, click the
Common
,
Day
and
Night
tabs to set the Saturation, Hue, Brightness,
Contrast and Sharpness for Day and for Night modes.
