3
www.observint.com
© 2014 Observint Technologies. All rights reserved.
—
SENS-UP
: Rock the joystick right or left to set the SENS-UP to OFF or AUTO.
—
BRIGHTNESS
: Rock the joystick right or left to select the brightness value (1 .. 100).
—
D-WDR
: Rock the joystick right or left to set the D-WDR to ON to improve the image quality or OFF
to disable the function.
—
DEFOG
: Rock the joystick right or left to set the defog function to OFF or ON. When set to ON,
press the joystick in to open the submenu. You can set the position, size, and the defog gradation.
•
BACKLIGHT
compensation. Rock the joystick right or left to select either OFF, WDR, HSBLC, or BLC.
—
WDR
(Wide Dynamic Range): Press the joystick in to open the submenu to set the:
GAIN
: Set the gain of BLC as High, Middle, or Low.
WDR BRIGHT
: Rock the joystick right or left to set the WDR brightness level (0 .. 60)
WDR OFFSET
: Rock the joystick right or left to set the WDR offset level (0 .. 60)
—
HSBLC
: Push the joystick in to open the HSBLC submenu.
AREA
: Rock the joystick right or left to select the area (AREA1 .. AREA4) you want to configure.
DISPLAY
: Rock the joystick right or left to select either OFF or ON. If ON, press the joystick in to
open set the size and position of the area by rocking the joystick up, down, left or right.
HSBLC LEVEL
: Rock the joystick right or left to set the HSBLC level (0 .. 100).
MODE
: Rock the joystick right or left to select either ALL DAY or NIGHT.
BLACK MASK
: Rock the joystick right or left to set the status to ON or OFF.
Default
: Restore the HSBLC settings to the default.
—
BLC
: Push the joystick in to open the BLC submenu.
GAIN
: Set the gain of BLC as High, Middle, or Low.
AREA
: Press the up/down/left/right button to define the BLC position and size. Select RET or
AGAIN to go back the BLC menu or redefine the BLC area.
Default
: Restore the BLC settings to the default.
•
WHITE BALANCE
: Rock the joystick right or left to select either MANUAL, ATW (Auto-tracking
White Balance), or AWC
SET.
—
MANUAL
: In this mode, you can set the BLUE level and RED level (1 .. 100).
•
DAY&NIGHT
: Rock the joystick right or left to select either COLOR, B/W (black and white), and EXT.
In EXT mode, you can set the IR LED ON or OFF.
•
NR
(Noise Reduction).
—
2DNR
: Rock the joystick right or left to select either OFF or ON.
—
3DNR
: Rock the joystick right or left to select either OFF or ON. If set to ON, press the joystick in to
open the submenu:
SMART NR
: Rock the joystick right or left to select either OFF or ON. If ON, press the joystick in to
select the sensitivity.
LEVEL
: Rock the joystick right or left to set the level of noise reduction (0 .. 100).
START. AGC
: Rock the joystick right or left to set the threshold level to enable AGC.
END. AGC
: Rock the joystick right or left to set the threshold level to disable AGC
•
SPECIAL
—
CAMERA TITLE
: Rock the joystick right or left to select either OFF or ON. If ON, press the joystick
in to compose a camera title. Navigate through the virtual keyboard by rocking the joystick left,
right, up or down. Select a letter by pressing the joystick in. Select RET to exit.
—
D-EFFECT
: (digital effect). This group contains the following features:
FREEZE
: Rock the joystick right or left to select either OFF or ON.
MIRROR
: Rock the joystick right or left to set the mirror (image flip) effect to either OFF, MIRROR,
V-FLIP (vertical flip), and ROTATE.
D-ZOOM
: Define the zoom area by configuring the position from PAN & TILT.
SMART D-ZOOM
: A D-ZOOM area (AREA1 or AREA2) can be ON (enabled), and the position,
sensitivity and time are configurable. When motion is sensed in the D-ZOOM area, the area is
expanded to full screen at the D-ZOOM factor for the time (seconds) for which it is configured.
NEG.IMAGE
(negative image): Rock the joystick right or left to select either OFF or ON.
—
MOTION
: Rock the joystick right or left to select either OFF or ON. If ON, press the joystick in to
open MOTION submenu. Select a MOTION area, set the
DISPLAY
: Rock the joystick right or left to select either OFF or ON. If ON, press the joystick in to
open the DISPLAY submenu. In this submenu, set the size and position of the area to sense for
motion.
SENSITIVITY
Rock the joystick right or left to set the sensitivity level (0 .. 60).
MOTION VIEW
: Rock the joystick right or left to select either OFF or ON.
DEFAULT
: Push the joystick in to return the settings to the factory default values for this menu.
—
PRIVACY
: Rock the joystick right or left to select either OFF or ON. If ON, press the joystick in to
select a PRIVACY shape.
SELECT
: Rock the joystick right or left to select the privacy shape (AREA 1 .. AREA8).
DISPLAY
: Select either COLOR, MOSAIC, INVERT, or OFF.
COLOR
: Rock the joystick left or right to select a number (represents a color). Select a number
(representing a color ) for the area selected. Then, press the joystick in to position and set the
size of the privacy zone.
TRANS
: Rock the joystick left or right to select a transparency level.
DEFAULT
: Push the joystick in to return your settings to the factory default values for this menu.
—
DEFECT
: Use this feature to compensate for camera imager defects. LIVE DPC, STATIC DPC and
Black DPC are configurable.
•
ADJUST
—
SHARPNESS
: Rock the joystick right or left to set the image sharpness level (0 .. 15)
—
MONITOR
: Rock the joystick right or left to select LCD or CRT.
—
LSC
(Lens Shading Compensation): This feature compensates the brightness of the image to
reduce the shading effect in image. Rock the joystick right or left to select the LSC feature to either
OFF or ON.
•
RESET
: Select to reset all camera settings to factory default configuration.
•
EXIT
: Close the OSD menu system.
Specifications
Camera
Image Sensor:
1/3” Progressive Scan CMOS
Signal System:
NTSC
Effective Pixels:
1920(H) × 1080(V)
Min. Illumination:
0.01 lux @ (F1.2, AGC on)
Shutter speed:
1/30 s to 1/50,000 s
Synchronization
Internal synchronization
Video Frame Rate
1080p @ 30 fps
HD Video Output:
1 analog HD-TVI (BNC), up to 1080P
Video Output: (CVBS)
1 Vp-p composite output (75 Ω/BNC), up to 1000 TV Lines
Day & Night
ICR
S/N Ratio
> 52 dB
Menu
Scene
Indoor, Outdoor, Indoor1, LOW-LIGHT
Camera ID
ON / OFF (15 characters, position programmable)
AGC
Support
D / N Mode
Color / BW / EXT
White balance
ATW, AWC-SET, Indoor, Outdoor, Manual
Privacy Mask
On / Off, maximum 8 zones
Motion Detection
Support, maximum 4 zones
BLC
Support
Anti-flicker
ON / OFF
Language
English, Japanese, CHN1, CHN2, Korean, German, French, Italian, Spanish, Polish, Russian, Portu-
guese, Dutch, Turkish, Hebrew and Arabic
Function,
Eclipse, Digital noise reduction, Digital zoom (62x), Slow shutter, Mirror, Defog, Defective pixel
correction, SMART D-ZOOM
General
Operating Conditions:
-4 °F ~ 140 °F (-20 °C ~ 60 °C)
Humidity:
90% or less (non-condensing)
Power Supply:
12 Vdc, 24 Vac
Power Consumption:
12 Vdc: Max. 3.5W ; 24 Vac: Max. 5W
Communication
In-line UTC controller (ALI-UTC)
Protocol: Pelco-C (Coaxitron)
Dimension:
2.74” × 2.28” × 5.70”
Weight:
13.4 oz (380 g)
