1
www.observint.com
ALI-BC700_CQ
7/7/14
What’s in the box
•
Camera assembly
•
Mounting hardware
•
This instruction guide
•
Drill template
ALIL-BC700G (left) and ALI-BC700VFG drill templates
Tools you need
To install the camera, you will need:
•
12 Vdc power source. See
Specifications
for wattage requirement.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Phillips screwdriver
•
Video and power extension cable
•
CCTV video setup monitor (optional)
Installation
Before installation:
•
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
provide the rated voltage and wattage for the camera. See the
Specifications
section.
During installation:
•
Camera Lens
: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or IR
array shield becomes soiled, clean it only with approved products. See the
Cleaning
section.
•
Monitor impedance
: Set the monitor impedance switch to 75 Ω.
•
Power supply
:
Camera drop cable
: The camera drop cable includes two connectors:
—
Video BNC connector
: For transmission of the video signal across a coax (75 Ω) extension cable.
—
Power connector:
When applying Vdc power, observe the power polarity. See the picture below
for the connector polarity configuration.
Mounting the camera
An ALI-BC700 series camera can be mounted on a wall or ceiling that has sufficient strength to support it.
The video/power drop cable from the camera can be routed either through mounting surface or through a
cable guide on the edge of the mounting base.
ALI-BC700G camera typical ceiling mounting
ALI-BC700 Series Infrared Bullet
Cameras Quick Installation Guide
For Products
: ALI-BC700G, ALI-BC700VFG
The ALIBI ALI-BC700 series indoor/outdoor bullet cameras include a new generation sensor with high
sensitivity and advanced circuit design technology. They feature high resolution, low image distortion and
low noise features which makes them suitable for both surveillance and image processing systems.
Features
•
High resolution color sensor: 700 TV Lines
•
2.8 - 12 mm Varifocal lens (ALI-BC700VFG only)
•
12 Vdc power
•
IR LED enables the day/night surveillance
•
IR cut filter auto switch
•
True day/night
•
High color rendition
•
Weather protection: IP66 rated
Mounting Bracket
Adjustments
Camera body
Mounting base
Lens
IR LED Array
ALI-BC700G Cameras
Mounting base
IR LED Array
Sun shield
Integrated
Mounting Bracket
Focus - zoom
adjustments
Vari-focal Lens
(2.8 mm - 12 mm)
ALI-BC700VFG Camera
Power
Connector
Video BNC
Connector
ALI-BC700 series cameras drop cable connectors
