20
2483 · Stand/Update
: 11.2021
EN
An abrasion of the blade can enlarge the swarf thickness inadmissibly. This
abrasion occurs because of multiple usage and outside influences (sand, soil
etc.). Therefore the strength of the swarf must be measured regularly - e.g. with
a calliper gauge. Scraper blades are worn parts and have to be replaced (see
chapter 8).
NOTICE
An incomplete scraping or a differing swarf thickness may result in a leaking
fusion joint.
8.
Replacement of blade
CAUTION
Risk of injury at the blade!
NOTICE
Please note when replacing the blade that only blades dyed blue may be used!
• Release the TORX screw with the TORX spanner supplied.
• Remove the blade and clean the supporting surface carefully.
• Insert a new blade.
• Tighten the TORX screw with the torx spanner.
Article
Order-No.
FWSGE 5/spare scraper blade
613324
