ALI Champion DH6000T-VHR, Руководство по установке

Страница: 25 / 26

APPENDIX B
: DH6000T-VHR 3PH to 1PH Electrical Conversion Instructions
1.
The input terminal block is mounted on the right side of the
machine base.
2.
Make a 12 AWG jumper wire and connect between L2 and L3
on the output side of the input terminal block.
3.
Connect the 1-phase incoming power to L1 and L2 to the
input terminal block.
208-240V/60/1
POWER CONNECTION
LINE IN
GND
NOT
USED
L1
L2 L3
L1 L2
(Jumper supplied by others)
12 AWG Wire
CONVERTING DH6000T-VHR FROM 3 PHASE TO 1 PHASE OPERATION
for 208-240V only.
WARNING:
Prevent electrocution when working on energized circuits. Disconnect
power at main breaker or service disconnect switch, then lock out and
tag the circuit.
STEP 1: Input Terminal Block.
1.
Remove the paper insulator, wires and jumper bars
from the heater terminals. Extra short jumper bars
are stowed on the heater terminals.
2.
Install the jumper bars for 1PH and connect
wire #51, L2, and #53.
3.
Reinstall the paper insulator.
Step 3: Wash Element
51
L2
53
3PH
L2
1PH
51
53
1.
Remove the black element cover.
2.
Remove the paper insulator, wires and jumper bars
from the heater terminals. Extra short jumper bars
are stowed on the heater terminals.
3.
Install the jumper bars for 1PH and connect
wire #56, L2, and #54.
4.
Reinstall the paper insulator and black cover.
Step 2: Booster Element
54
L2
56
1PH
54
56
L2
3PH
1.
Remove the data plate cable tiedto the input
terminal block.
2.
Cover the existing 3-PH Machine Electrical
Connection Data Plate with the 1-PH provided.
3.
Cover the existing dishwasher Data Plate located
on the corner of the front panel.
Step 4: Change Data Plate
17