µISP User's Manual
11
Interfacing with your Test/Programming
Equipment
µISP can be controlled in three ways:
•
By manually sending commands and receiving answers, using the Project
Generator Terminal or any other terminal application;
•
By configuring the instrument so that it can work in standalone, that is without
a connection to a PC;
•
By building your own PC software that interfaces to the instrument (for more
information, see “WriteNow! API” on Programmer’s Manual).
Hardware Test
The diagnostic procedure is a very easy way to verify if any hardware faults occur.
Use the provided test-board to check the programmer hardware functionality.
Programming Drivers
µISP comes with preinstalled programming drivers (algorithms) that support
common microcontrollers and memories.
