ALGE-Timing OPTIc3, Руководство пользователя, Страница: 57 / 121

Manual
Photo Finish OPTIc3
- 57-
10 Timing (Timing Window)
Before you start a race, you should start the timing window of the heat you want to start and for
which you want to execute the timing. It is possible to start several heats in the timing window
(e.g. for rowing events).
•
Before you start a race, you need to establish a race structure in the meet browser
(see 13 Meet Browser).
•
Double click on the heat that you want to open in the meet browser.
•
The timing window appears showing the selected heat.
•
If the bar of a heat in the timing window is yellow (see below), it means that the picture of this
heat is shown in the overview window, and in windows view1 and view2. Otherwise, the bar
is light blue.
Start
When you click on this button it changes to another icon. Each icon has a different function.
Start is ready: The starter can start this heat at any time.
Start is blocked: If you receive a start impulse the time does not start.
Race is started.
False start triggering (Reset the race so another start is possible.): This icon is only
shown if you move the mouse over the icon
.
Display
With this function you select the display board. If more than one started heat is active in the
<Timing> window you have to select which time of the two heats you want to show on the display
board. If only one heat is active, you can delete the display board by clicking on this icon.
Display board (GAZ or D-LINE) is active for this heat. In the field <Display time> the time
is shown like it is shown on the
ALGE-TIMING
display board.
Display board (GAZ or D-LINE) is inactive for this race. If no other race is running the
display is blank.
REC (Record Photo Finish)
It is possible to allocate more than one heat to the recording focus (this means you can record
photo finish pictures of different heats at the same time).
•
When the button shows , the camera records as soon as it gets a recording impulse (pho-
tocell, push button, F8-key, motion detection).
•
If it changes to it is recording (this button is shown as long as the recording goes on).
•
When the button shows , the camera does not record at all.