Pairing your DMX fixture
1
Connect the transmitter ( DMX-WT) to your DMX controller OUTPUT and the receiver to your
DMX fixture.
2
Power up transmitter and receiver using the power adaptor included in the box.
3
Press and hold 4 seconds on receiver button (4) to reset the pairing until the status LED(3) beco
mes white.(this means that receiver is now ready to be paired).
4
Press now on transmitter button (4) to start pairing. Both receiver and transmitter will blink rapidly
(transmitter in blue color and receiver in green color). The pairing is processing.
Once paring is done, the transmitter status LED is now fixed blue color and receiver status LED is
fixed green color.
If Transmitter or receiver looses DMX signal, the status LED will blink slowly.
Add a fixture in an active group.
1
Press and hold 4 seconds on receiver button (4) to reset the pairing until the status LED(3)
becomes white.(this means that receiver is now ready to be paired).
2
Press now on transmitter button (4) to start pairing. Both receiver and transmitter will blink rapidly
(transmitter in blue color and receiver in green color). The pairing is processing.
Once paring is done, the transmitter status LED is now fixed blue color and receiver status LED is
fixed green color.
The other fixtures already paired in this group with this transmitter remain paired of course.
Set up a new group
To set up a new group is very easy. You need one more transmitter.
Keep the existing groups active , and start the procedure above called « Pairing your DMX fixture».
Notes:
This DMX wireless system from
Algam Lighting
is not limited in number of groups and in number of
fixtures connected in a group.
SETUP
