AlfrescoPlus DOUBLE Скачать руководство пользователя страница 13

Страница: 13 / 16

SINGLE/DOUBLE STORAGE MODULE & SINGLE/DOUBLE SINK MODULE ASSEMBLY INSTRUCTIONS

HOW TO INSTALL THE SINK MODULE

Step 1:

Ensure that the top white panel

is NOT installed into the frame. This panel
is not provided with our standard sink
module however if you are converting a
single or double solid top module into a
sink top, then create a suitable cutout into
the top of the cabinet by using a hole saw
and jig saw if required.

How to Install the Sink Module

Step 1: Ensure that the top white panel is NOT installed into the frame. This panel is not provided with our standard

sink module however if you are converting a single or double solid top module into a sink top, then create a suitable

cutout into the top of the cabinet by using a hole saw and jig saw if required.

This top white panel IS provided in the

single and double solid top module.

This is how the single or double sink

module should look after fully assembled.

FIG 20

FIG 21

FIG 22

How to Install the Sink Module

Step 1: Ensure that the top white panel is NOT installed into the frame. This panel is not provided with our standard

sink module however if you are converting a single or double solid top module into a sink top, then create a suitable

cutout into the top of the cabinet by using a hole saw and jig saw if required.

This top white panel IS provided in the

single and double solid top module.

This is how the single or double sink

module should look after fully assembled.

FIG 20

FIG 21

FIG 22

FIG. 20

FIG. 21

FIG. 22

This top white panel is provided in the
single and double solid top module but do
not install for sink module.

This is how the single or double sink
module should look after fully assembled.

How to Install the Sink Module

Step 1: Ensure that the top white panel is NOT installed into the frame. This panel is not provided with our standard

sink module however if you are converting a single or double solid top module into a sink top, then create a suitable

cutout into the top of the cabinet by using a hole saw and jig saw if required.

This top white panel IS provided in the

single and double solid top module.

This is how the single or double sink

module should look after fully assembled.

FIG 20

FIG 21

FIG 22

How to Install the Sink Module

Step 1: Ensure that the top white panel is NOT installed into the frame. This panel is not provided with our standard

sink module however if you are converting a single or double solid top module into a sink top, then create a suitable

cutout into the top of the cabinet by using a hole saw and jig saw if required.

This top white panel IS provided in the

single and double solid top module.

This is how the single or double sink

module should look after fully assembled.

FIG 20

FIG 21

FIG 22

Содержание DOUBLE

















Результаты поиска

Содержание DOUBLE

Отзывы:

Похожие инструкции для DOUBLE

Бренды по названию

Популярные бренды

AlfrescoPlus DOUBLE, Руководство по сборке

Результаты поиска

Содержание DOUBLE

Отзывы:

Похожие инструкции для DOUBLE

Бренды по названию

Популярные бренды