6
A
SSEMBLY
Step
4
NOTE: To HOLD the legs together in positon, the LEGS SUPPORT
PANELS WILL OVERLAP AT ALL 04 (four) CORNERs.
First, attach the Leg Support(
D
/
E
) with Groove End to the Studs(
J
) and then
attach Support Panel(
D
/
E
) without Groove End to Studs(
J
), together.
Then affix the Leg Support(
D
/
E
) to the table legs with the Washers, Spring
Washers and Nuts(
K
) using the
Wrench
(
M
).
DO NOT tighten, yet
.
Repeat the same process for all 04 (four) contact
points of the Table Legs and
the Legs Support Panels.Once all the panels are
in place,proceed to
TIGHTEN
the screw-bolts of the
legs, in a rotational
sequential manner.By this action, it allows the table legs to be locked into
position, evenly, thus
reducing wobbles.Thereafter, lock all the Leg Support
Panels tightly into position.
D
M
K
E
