ALFRA Rotabest Piccolo 38/50 X, Руководство по эксплуатации, Страница: 12 / 28

12
Standard scope of supply
•
Transport case
•
Coolant unit
•
Safety belt
•
Allen key 2,5 mm
•
Allen key 4,0 mm
•
Allen key 6,0 mm
Switching on and off
•
Check connecting line and plug on damages first.
•
Push the button MAGNET ON so that the magnet adheres and the grip of the drill stand is ensured.
•
For non-magnetisable materials use the Rotabest Vacubest (Prod.-No. 18150).
•
When working on walls and ceilings secure the machine with the safety belt.
At this work we recommend cooling the tool with a spray. For example Alfra BIO 4000, prod. No. 21040.
•
Push the button MOTOR ON to start the motor.
•
To switch off the machine proceed in reverse order, MOTOR OFF and then MAGNET OFF.
How to work with annular cutters
•
Push ejector pin (center pin) through head of annular cutter.
•
Core drills with Weldon shank are tightened with clamping screws (DIN 913) on both clamping surfaces.
•
First place annular cutter with ejector pin on a marked centre or marking.
•
Set the cutter and spot-drill, until the entire cut edge is formed as a circle.