alfen E-Socket, Быстрое руководство по установке

Страница: 9 / 34

Quick start guide
Mounting the E-Socket on the Eve
Single pole
1 Use the proper accessory, mounting material or
kit for installation:
• Eve Single pole (803873036-ICU)
• The E-Socket Eve Single Pole Bracket (803873063-
ICU).
• Four (4) pole mount screws. Included in E-Socket
package content.
2 Remove the carriage bolt, washer and nut from
the Eve Single pole.
3 The E-Socket cable entry is positioned on the
right side of the Eve Single. Mount the Support
pole mounting bracket on the right side of the
charging station.
• Mount the Eve Single pole bracket with the carriage
bolt, washer and nut on the Eve Single pole.
4 Remove the four (4) philips head screws to
open the front cover with socket of the E-
Socket.
Leave the front cover with socket hanging.
Take care not to damage the cables.
5 Use de four (4) pole mount screws to mount the
E-Socket on the Eve Single Pole Bracket.
6 The socket is positioned upside down.
Make sure the socket flap opens in an upward
direction.
• Unscrew the four pan head screws and pull the
front cover with socket slightly forward.
• Rotate the front cover with socket 180 degrees in
order for the socket flap to open in an upward
direction.
7 Use the four philips head screws to close the
front cover with socket.
Take care not to damage the cables; keep them
clear of the front cover while closing so they do
not obstruct it.
8 The E-Socket mounted on the Eve Single pole
Please refer to page 16 on how to install the
E-socket on the charging station.
1
4
Pole mount
screw
1
Pole mounting
bracket
1
Eve Single pole
2
3
4
5
6
7
8
E-Socket cable
power cable
8
en