ALFAtron SUH4T, Руководство пользователя, Страница: 14 / 22

4K HDBT Splitter 1x4 with PoC
10
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, only then will you be able to send command in Command Sending Area.
Note: To control SUH4 via RS232 port, the communication protocol parameters should
be configured in the right manner: Baud rate: 9600; Data bit: 8; Stop bit: 1; Parity bit:
none.
4.2.3 RS232 Communication Commands
Command Function Feedback Example
EDIDUpgrade[x][y].
Upgrade EDID data via serial port;
[X] : unit ID, varies from 00~15;
[Y] : serial number of embedded
EDID, varies from 0~4 (correspond
to embedded EDID 1~5 separately).
Connect input source and keep
energized
before sending this
command.
WAIT FOR EDID
FILE
Parameter Configuration area
Monitoring area, indicates
whether the command
sent works.
Command Sending area
Parameter Configuration area
Monitoring area, indicates
whether the command
sent works.
Command Sending area