ALFAtron ALF-WUK4A Скачать руководство пользователя страница 24

ALFATRON ALF-WUK4A

 

20 

1. Limited warranty in respect of Alfatron Products Only 

1.1 This limited warranty covers defects in materials and workmanship in this product. 

1.2 Should warranty service be required, proof of purchase must be presented to the 
Company. The serial number on the product must be clearly visible and not have been 
tampered with in any way whatsoever. 

1.3 This limited warranty does not cover any damage, deterioration or malfunction 
resulting from any alteration, modification, improper or unreasonable use or 
maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire, 
improper packing and shipping (such claims must be presented to the carrier), 
lightning, power surges, or other acts of nature. This limited warranty does not cover 
any damage, deterioration or malfunction resulting from the installation or removal of 
this product from any installation, any unauthorized tampering with this product, any 
repairs attempted by anyone unauthorized by the Company to make such repairs, or 
any other cause which does not relate directly to a defect in materials and/or 
workmanship of this product. This limited warranty does not cover equipment 
enclosures, cables or accessories used in conjunction with this product. 

This limited warranty does not cover the cost of normal maintenance. Failure of the 
product due to insufficient or improper maintenance is not covered. 

1.4 The Company does not warrant that the product covered hereby, including, without 
limitation, the technology and/or integrated circuit(s) included in the product, will not 
become obsolete or that such items are or will remain compatible with any other 
product or technology with which the product may be used. 

1.5 Only the original purchaser of this product is covered under this limited warranty. 
This limited warranty is not transferable to subsequent purchasers or owners of this 
product. 

1.6 Unless otherwise specified, the goods are warranted in accordance with the 
manufacturer’s product specific warranties against any defect attributable to faulty 
workmanship or materials, fair wear and tear being excluded. 

Содержание ALF-WUK4A



























Отзывы: