Alfatron ALF-SUK4T
17
7. DIP Switch Operation
7.1 EDID Management
The DIP switch on the front panel can be used to set the EDID to a fixed value to
ensure compatibility in video resolution.
The switch represents “
0
” when in the lower (
OFF
) position, and it represents “
1
” while
putting the switch in the upper (
ON
) position.
Switch 1~3 is used for EDID setting. The DIP switch status and its corresponding
setting are also shown on the back of the unit.
Switch Status
EDID
000
Obtains the EDID from the first detected display device which is
connected to HDBaseT receiver starting at HDBT output 1>2>3>4
(Default).
001
Obtains the EDID from the first detected display device which is
connected to HDBaseT receiver starting at HDBT output 4>3>2>1.
010
1080p LPCM
011
1080p DTS/Dolby
100
3840x2160@30Hz HDR LPCM
101
3840x2160@30Hz HDR DTS/Dolby
110
3840x2160@60Hz HDR LPCM
111
3840x2160@60Hz HDR DTS/Dolby