6
Alfatron ALF-SCU91T-N
CONTROL:
a.
FIRMWARE: Type-A USB port for updating system firmware or loading customized
EDID data.
b.
IR EYE: Connect with IR Receiver (with carrier wave only) to receive IR signal
send by IR Remote to control this Scaler Switcher.
c.
IR ALL IN: IR input port used with far-end IR output port. Connect with IR Receiver
(with carrier) to receive IR signal from all kinds of IR Remote to control far-end
devices from local.
d.
IR ALL OUT: IR output port used with far-end IR input port. Connect with IR emitter
(with carrier) to send IR signal to control local devices from remote.
e.
RS232: Serial port, 3-pin phoenix connector, connect with a control device (such as
PC) to control SCU91T.
f.
TCP/IP: Ethernet port, connect PC to control SCU91T via GUI.
I:
AUDIO AMP: Audio output port, connect with 70V/100V constant voltage audio
amplifier.
II:
AC100V-240V: Power port, connect to an AC 100V~240V power via the included
power cord.