ALFAtron ALF-SCK41TS, Руководство пользователя

Страница: 10 / 43

ALF-SCK41TS
6
3.2. Switcher Rear Panel
①
INPUTS: Four HDMI inputs, one DisplayPort and one USB-C input.
②
OUTPUTS: One HDMI and one HDBaseT output. The HDBaseT output supports
48V PoC.
③
AUDIO IN:

LINE: Line audio input which can be embedded in any HDMI input.

MIC: Microphone input for audio mixing. Set 48V phantom power mode switch
as needed: ON for Condenser microphone; OFF for Dynamic microphone.
④
AUDIO OUT:

L+R: Balanced analog audio ouput for audio de-embedding.

SPDIF: Digital SPDIF audio output for audio de-embedding.
⑤
CONTROL :

CONTACT IN: Contact external sensors, buttons and other devices for input
source selection.

IR IN: Connects to IR receiver for IR pass-through.

IR OUT: Connects to IR emitter for IR pass-through.

IR EYE: Connects to IR receiver for local switcher control.

FIRMWARE: Type-A USB for firmware upgrade.

RS232: 3-pin terminal block for RS232 control.

TCP/IP: RJ45 port to control the switcher via GUI.
⑥
DC 24V: DC connector for power adapter connection.
DC 24V
HDBT
HDMI 1. HDMI 4. HDMI 2. HDMI 3. HDMI 3. DP
INPUTS OUTPUTS
4. USB-C
AUDIO IN
L R
LINE
Tx Rx
IR EYE IR IN IR OUT TCP/IP RS232
CONTROL
ON
Phantom 48V)
(
OFF
MIC
AUDIO OUT
FIRMWARE L R CONTACT IN
1 2 3 4
SPDIF
1
3
4
5
2 6