ALFAtron ALF-MMX3232A-N, Руководство пользователя

Страница: 23 / 44

ALF-MMX3232A-N
20
6.3. RS232 Communication Command
With this command system, users are able to control and operate the ALF-MMX3232
matrix with RS232 software remotely.
Note:

Please disconnect all the twisted pairs before sending command EDIDUpgrade[X].

In the commands, “[” and “]” are symbols for easy reading and do not need to be
typed in actual operation.

Please remember to end the commands with the ending symbols “.” or “;”.

Type the command carefully, it is case-sensitive.

Commands pertaining to EDID is only for signal cards that support EDID
management.

The matrix boasts 6 in-built EDID data, the chart below illustrates the detailed
information:
No. Detailed Information
1 1080P 2D 5.1CH
2 1080P 2D 2.0CH
3 720P 2D 5.1CH
4 720P 2D 2.0CH
5 4kx2k 2D 5.1CH
6 4kx2k 2D 2.0CH
Update in-built EDID data by sending the command: UpgradeIntEDID[x]. .
Communication protocol:
Baud rate: 9600;
Data bit: 8;
Stop bit: 1;
Parity bit: none.