background image

ALF-DSP88-U 

-47- 

7. Warranty 

 

1.1 

This limited warranty covers defects in materials and workmanship in this product. 

1.2 

Should warranty service be required, proof of purchase must be presented to the  Company. The 
serial number on the product must be clearly visible and not have been tampered with in any way 
whatsoever. 

1.3 

This limited warranty does not cover any damage, deterioration or malfunction resulting from any 
alteration, modification, improper or unreasonable use or maintenance, misuse,  abuse, accident, 
neglect, exposure to excess moisture, fire, improper packing, and shipping  (such claims must be 
presented to the carrier), lightning, power surges, or other acts of nature. This limited warranty does 
not cover any damage, deterioration or malfunction resulting from the installation or removal of this 
product from any installation, any unauthorized tampering with this product, any repairs attempted 
by anyone unauthorized by the Company to make such repairs, or any other cause which does not 
relate directly to a defect in materials and/or workmanship of this product. This limited warranty 
does not cover equipment enclosures, cables or accessories used in conjunction with this product. 

This limited warranty does not cover the cost of normal maintenance. Failure of the product due to 
insufficient or improper maintenance is not covered. 

1.4 

The Company does not warrant that the product covered hereby, including, without limitation, the 
technology and/or integrated circuit(s) included in the product, will not become obsolete or that such 
items are or will remain compatible with any other product or technology with which the product 
may be used. 

1.5 

Only the original purchaser of this product is covered under this limited warranty. This  limited 
warranty is not transferable to subsequent purchasers or owners of this product. 

1.6 

Unless otherwise specified, the goods are warranted in accordance with the manufacturer’s product 
specific warranties against any defect attributable to faulty workmanship or materials, fair wear and 
tear being excluded. 

1.7 

This limited warranty only covers the cost of faulty goods and does not include the cost of labor and 
travel to return the goods to the Company’s premises. 

1.8 

In the event of any improper maintenance, repair or service being carried out by any third persons 
during the warranty period without the Company’s written authorization, the limited warranty shall 
be void. 

1.9 

A 7 (seven) year limited warranty is given on the aforesaid product where used correctly according to 
the Company’s instructions, and only with the use of the Company’s components. 

Содержание ALF-DSP88-U

















































Отзывы: