ALFAtron ALF-10XUSB2C Скачать руководство пользователя страница 31

ALFATRON ALF-3XUSB2C

 

 

 

30 

 

 
 

6. Warranty 

Limited warranty in respect of Alfatron Products 

1.1 This limited warranty covers defects in materials and workmanship in this product. 
1.2 Should warranty service be required, proof of purchase must be presented to the Company. The 
serial number on the product must be clearly visible and not have been tampered with in any way 
whatsoever. 
1.3 This limited warranty does not cover any damage, deterioration or malfunction resulting from any 
alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, accident, neglect, 
exposure to excess moisture, fire, improper packing and shipping (such claims must be presented to the 
carrier), lightning, power surges,  or other acts of nature. This limited warranty does not cover any 
damage, deterioration or   
 
malfunction resulting from the installation or removal of this product from any installation, any 
unauthorized tampering with this product, any repairs attempted  by anyone unauthorized by the 
Company to make such repairs, or any other cause which does not relate directly to a defect in materials 
and/or workmanship of this product. This limited warranty does not cover equipment enclosures, cables 
or accessories used in conjunction with this product. 
This limited warranty does not cover the cost of normal maintenance. Failure of the product due to 
insufficient or improper maintenance is not covered. 
1.4 The Company does not warrant that the product covered hereby, including, without limitation, the 
technology and/or integrated circuit(s) included in the product, will not become obsolete or that such 
items are or will remain compatible with any other product or technology with which the product may be 
used. 
1.5 Only the  original  purchaser of this product is covered under this limited warranty. This limited 
warranty is not transferable to subsequent purchasers or owners of this product. 
1.6 Unless otherwise specified, the goods are warranted in accordance with the manufacturer’s product 
specific warranties against any defect attributable to faulty workmanship or materials, fair wear and tear 
being excluded. 
1.7 This limited warranty only covers the cost of faulty goods and does not include the cost of labor and 
travel to return the goods to the Company’s premises. 
1.8 In the event of any improper maintenance, repair or service being carried out by any third persons 
during the warranty period without the Company’s written authorization, the limited warranty shall be 
void. 
1.9 A 7 (seven) year limited warranty is given on the aforesaid product where used correctly according to 
the Company’s instructions, and only with the use of the Company’s components. 
1.10 The Company will, at its sole option, provide one of the following three remedies to whatever extent 
it shall deem necessary to satisfy a proper claim under this limited warranty: 
1.10.1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time, free 
of any charge for the necessary parts and labor to complete the repair and restore this product to its 
proper operating condition.; or 

Содержание ALF-10XUSB2C

































Отзывы: