manualshive.com logo in svg

AlfaRadio AlfaSpid, Инструкция по эксплуатации

Поделиться
Скачать
AlfaRadio AlfaSpid Скачать руководство пользователя страница 3

Page 3  of   21 

www.alfaradio.ca 

A

lfaSpid Rotator  

 

A

lfa Radio Ltd. 11211 - 154 St. Edmonton, Alberta, Canada T5M 1X8 

 
The 

A

lfaSpid rotator is an extra heavy-duty rotator designed to run 

large communication antennas and comes complete with an 
electronic control unit.  The rotator is designed to be mounted pipe to 
pipe or on an optional adaptor plate for conventional in tower 
mounting.  It can also be mounted outside of the tower on the mast, 
or used in a side mount configuration. 

 
Rotator................................................................................................ 1 
Controller ............................................................................................ 1 

........................................................................................................... 1 

GMA Fuses ........................................................................................ 2 
 

Optional 

Custom Mouse ................................................................................... 1 
 

 
Input Voltage (Typical)............................................... 12 – 24 Volts DC 
Input Current (Nominal Draw)............................................. 3 – 4 Amps 
Motor ......................................................................... 12 – 24 Volts DC 
Fuse ...............................................................................8.0 Amp GMA 
Rotation Speed......................................120 sec (12 V) / 60 sec (24 V) 
Turning Torque (in-lbs) .................................1400 (12 V) / 1740 (24 V) 
Braking Torque (in-lbs) ........................................................... > 14,000 

Introduction 

Shipping Contents 

Technical Data 

Содержание AlfaSpid






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды