Copyright
2005 Alfano, S.A. Tous droits réservés.
4
Turn Off
From the main page, press the button on the
bottom right.
CIRCUIT, Configuration
From the main page, press the button on the
bottom left.
For the visualization and the logical recording of the data, it is necessary,
before using the ALFANO in race, to configure the morphology of the
track
.
-
With the arrow « » at the top, choose the number of magnetic
strips installed on the circuit.
-
With the arrow « » down, choose which band Magnetic must
start the stopwatch.
-
Press on «
OK
» to finish the configuration of the circuit.
In the following example : configuration of a circuit with three magnetic
stripes with the departure timing from the second magnetic stripe.
This figure shows a circuit with a
magnetic stripe.
