Alfa Romeo Giulia 952 2017, Руководство пользователя

Страница: 226 / 324

ENGINE OIL
161)
66)
IMPORTANT It is advisable to check the
oil level indication before long journeys.
The engine oil level can be seen on the
instrument panel display every time the
engine is started, or on the Connect
system display by activating on the main
menu (MENU button) the following
functions in sequence: “Apps”; “My Car”
and “Oil Level”.
Check on the display using the 6 notches
that the oil level is between MIN and
MAX level: 1 notch MIN level, 6 notches
MAX level. If the oil level indication
reaches the first red mark, add oil
through the filler 1, considering that each
notch shown on the display corresponds
to approximately:
2.9 V6 Engine
0.055 UK gal (250 ml)
2.0 T4 MAir engine
0.055 UK gal (250 ml)
2.2 JTD Engine
0.033 UK gal (150 ml)
67)
IMPORTANT Make sure not to add too
much engine oil when topping up. Engine
oil in excess may damage the engine.
Have the car checked. Never exceed the
MAX level when topping up engine oil. It
is advisable to check the oil level in
intermediate steps on the display. Use
the oil dipstick on the Quadrifoglio
version.
IMPORTANT The oil level is not refreshed
immediately on the display after topping
up. Consequently, wait for the oil level to
be refreshed on the display following to
procedure shown below.
Manual gearbox: checking oil level
2.9 V6 Engine
Check that the oil level is between the
MIN and MAX marks on the dipstick
6 with the car on level ground. Take out
the engine oil dipstick 6, clean it with a
lint-free cloth and reinsert it. Extract the
dipstick again and check that the level is
between the MIN and MAX marks on it.
67)
IMPORTANT Make sure not to add too
much engine oil when topping up. Engine
oil in excess may damage the engine.
Have the car checked. Never exceed the
MAX level when topping up engine oil. It
is advisable to check the oil level in
intermediate steps using the oil dipstick.
IMPORTANT The oil level is not refreshed
immediately on the display after topping
up. Consequently, wait for the oil level to
be refreshed on the display following to
procedure shown below.
2.0 T4 MAir engine
Have this operation performed at an Alfa
Romeo Dealership.
2.2 JTD Engine
IMPORTANT The oil dipstick in the engine
compartment, on versions with 2.2 JTD
engine, must be used ONLY if the oil level
sensor is faulty. The latter condition is
indicated by the
symbol which will
appear on the instrument panel.
The manual engine oil level checking
procedure must be carried out, when
necessary, on a cold engine only.
Never attempt to carry out the manual
engine oil checking procedure (using the
dipstick) with the engine hot. Contact
with the surrounding hot engine parts
could cause burns.
This operation is permitted only for the
time actually needed to restore correct
operation of the oil level sensor at an Alfa
Romeo dealership.
Oil level indication update on display
If a top-up is needed, proceed as follows
to ensure correct indication of the oil
level on the display:
2.9 V6 and 2.2 JTD engines
with the vehicle level, run the engine
until the second oil temperature notch
lights on the display on the instrument
panel, then stop the engine;
wait for at least 3 minutes, turn the
ignition switch to ON without starting the
engine and wait for 20 seconds.
2.0 T4 MAir engine
with the vehicle level, run the engine
for approximately 5 minutes
224
SER
VICING
AND
C
ARE