Alfa Romeo Alfa GT, Руководство пользователя

Страница: 180 / 307

GETTING TO KNOW YOUR CAR
178
Equalizer settings
(only if the equalizer is on)
To set a personal equalizer adjustment use
“
▲
” ( 6 ) or “
▼
” ( 8 ) “ USER ”; the display
shows “ EQ SET ”.
To change the equalizer settings, use
“
˙˙
” ( 7 ) or “
¯¯
” ( 4 ). The display
shows a graph with 7 bars, where each bar
represents a frequency for the left or right
channel. Choose the bar to be adjusted us-
ing “
˙˙
” ( 7 ) or “
¯¯
” ( 4 ); the bar cho-
sen starts to flash and it is possible to adjust
using “
▲
” ( 6 ) or “
▼
” ( 8 ).
To store new settings, press the “ MENU ”
button again ( 9 ). The display still shows
“ EQ SET ”.
Treble tone reduction function
(HICUT)
Using this function it is possible to reduce
the treble tones, in accordance with the sig-
nal transmitted. To turn this function on/off,
use “
¯¯
” ( 4 ) or “
˙˙
” ( 7 ).
The display will show the current status
of the function:
– “ HICUT ON ”: function on
– “ NO HICUT ”: function off.
Phone volume adjustment
function (PHONE)
With this function it is possible to adjust
(setting from 1 to 66) or cut off (OFF set-
ting) the telephone sound.
To turn on/off, use “
¯¯
” ( 4 ) or “
˙˙
”
( 7 ).
To adjust the sound, use “ VOL+ ” ( 21 )
or “ VOL- ” ( 19 ).
The display will show the current status of
the function:
– “ PHONE 23 ”: function on with vol-
ume setting 23
– “ PHONE OFF ”: function off.
Allocating a name to a CD
(CD NAME)
This function can be chosen only if a Com-
pact Disc is inserted. To turn on, use “
¯¯
”
( 4 ) or “
˙˙
” ( 7 ): the display will show
“ CD-NAME ”. If the CD already has a
name, this will be shown on the display, if
not, eight dashes will be shown. If storage
is no longer available for a new name, the
display will show the first name stored.
To change the name or give a name to the
new CD press “
¯¯
” ( 4 ) or “
˙˙
” ( 7 ).
Press the buttons again to choose the posi-
tion of the character to be changed. Press
“
▲
” ( 6 ) or “
▼
” ( 8 ) to choose or change
the character.
To store the name, press the “ MENU ”
button again ( 9 ). The display will show
“ CD-NAME ”.
To clear a name, turn the function on and
press “
▲
” ( 6 ) or “
▼
” ( 8 ) to choose the
name to be cleared, then press the
“
MENU ” ( 9 ) button for about 2 seconds.
The system beeps and the display shows
“
ONE CLR ” for about 2 seconds. At this
point the procedure can be started to give a
new name.