Alfa Romeo 4C Spider 2020, Руководство пользователя

Страница: 37 / 164

GETTING TO KNOW YOUR INSTRUMENT PANEL 35

Buzzer Volume

Seat Belt Buzzer

Service

Daylights (DRL)

Exit Menu
Selecting An Option Of The Main Menu Without
Submenu:
1. Briefly push the SET/BACK button to select
the main menu option to set.
2. Push the up or down arrow button (by single
pushes) to select the new setting.
3. Briefly push the SET/BACK button to store
the new setting and go back to the main
menu option previously selected.
Selecting An Option Of The Main Menu With
Submenu:
1. Briefly push the SET/BACK button to
display the first submenu option.
2. Push the up or down arrow button (by single
pushes) to scroll through all the submenu
options.
3. Briefly push the SET/BACK button to select
the displayed submenu option and to open
the relevant setup menu.
4. Push the up or down arrow button (by single
pushes) to select the new setting for this
submenu option.
5. Briefly push the SET/BACK button to store
the new setting and go back to the
previously selected submenu option.
6. Push and hold the SET/BACK button to
return to the main menu (short hold) or the
main screen (longer hold).
Speed Buzzer (Speed Limit)
With this function, it is possible to set the
vehicle speed limit (mph or km/h) to
immediately alert the driver when the set limit is
exceeded.
To set the speed limit, proceed as follows:
1. Briefly push the SET/BACK button. The
display will show the message (Speed
Buzzer).
2. Push and release the up or down arrow
button to select speed limit activation (On)
or deactivation (Off).
3. When the function is activated (On), briefly
push the SET/BACK button to display the
previously set speed. Pushing the up or
down arrow buttons selects the speed limit.
Push SET/BACK to confirm selection.
NOTE:
The setting can be increased or decreased by
5 mph or km/h each time the up or down arrow
button is pushed for speed settings above
20 mph (32 km/h). To increase or decrease the
set speed rapidly, push and hold the up or down
arrow button. Save the setting by briefly pushing
the button when you approach the required
setting.
Briefly push the SET/BACK button to go back to
the menu screen, or push and hold the SET/
BACK button (approximately one second) to go
back to the main screen without storing the
settings.
To cancel the setting, proceed as follows:
1. Briefly push the SET/BACK button, “On” will
display.
2. Push and release the down button, “Off” will
display.
3. Briefly push the SET/BACK button to go
back to the menu screen, or push and hold
the SET/BACK button (approximately one
second) to go back to the main screen
without storing the settings.
Trip B Activation
Through this option, it is possible to activate
(On) or deactivate (Off) the Trip B (partial trip)
display.
For further information, see “Trip Computer.”
3
20_4C_OM_EN_USC_t.book Page 35