Alfa Romeo 4C Spider 2015 Скачать руководство пользователя | Manualshive

Страница: 14 / 148

background image

To disable the volumetric protection, turn the ignition key from STOP (OFF/LOCK) to MAR (ON/RUN)

twice in a row, then activate the alarm within 15 seconds, pushing the lock button on the remote

control. When the function is deactivated, this is indicated by the vehicle security light in the

instrument panel flashing for several seconds.

To disable the anti-lift protection, the ignition key must be turned from STOP (OFF/LOCK)

(OFF/LOCK) to MAR (ON/RUN) three times in a row, followed by activating the alarm within 15

seconds, pushing the lock button on the remote control.

When the function is deactivated, this is indicated by the vehicle security light in the instrument

panel flashing for several seconds.

Any disabling of the volumetric/anti-lift protection must be repeated each time the instrument

panel is switched off.

S E AT B E LT S Y S T E M S

•

Be sure everyone in your vehicle is in a seat and using a seat belt properly.

•

Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To
remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too
tight, tilt the latch plate and pull on the lap belt. A snug seat belt reduces the risk of sliding under
the seat belt in a collision.

•

Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is
comfortable and not resting on your neck. The retractor will withdraw any slack in the shoulder
belt.

•

A deployed pretensioner or a deployed air bag must be replaced immediately.

Lap/Shoulder Belts

•

All seating positions in your vehicle are equipped with lap/shoulder belts.

•

Be sure everyone in your vehicle is in a seat and using a seat belt properly.

•

Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To
remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too
tight, tilt the latch plate and pull on the lap belt. A snug seat belt reduces the risk of sliding under
the seat belt in a collision.

•

Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is
comfortable and not resting on your neck. The retractor will withdraw any slack in the shoulder
belt.

Seat Belt Pretensioner

•

The front seat belt system is equipped with pretensioning devices that are designed to remove
slack from the seat belt in the event of a collision.

•

A deployed pretensioner or a deployed air bag must be replaced immediately.

G E T T I N G S T A R T E D

12

«
...
12
13
14
15
16
...
»

Содержание 4C Spider 2015





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 4C Spider 2015

Бренд: Laser Страницы: 8

Бренд: Q'STRAINT Страницы: 10

2011 Corolla LE

Бренд: Toyota Страницы: 19

Sprinter Bed System Adventure Wagon Kit

Бренд: FVC Страницы: 8

Бренд: Farad Страницы: 8

Бренд: Sears Страницы: 41

Бренд: BMW Страницы: 189

Бренд: Guidosimplex Страницы: 8

Бренд: Jaeger Страницы: 11

Бренд: Belkin Страницы: 2

Бренд: rockymounts Страницы: 6

Бренд: Veldo Teknoloji Страницы: 32

Бренд: Vauxhall Страницы: 95

Бренд: TomTom Страницы: 22

Бренд: Aries Страницы: 3

Бренд: Toyota Страницы: 204

Бренд: Buick Страницы: 394

Бренд: EZ-ON Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды