Alfa Romeo 4C Alpine Radio 2018, Руководство пользователя

Страница: 84 / 149

Setting item: USB PAIR
Setting contents:
OFF / ON (Initial setting)
OFF: Turn off the auto pair function.
ON: Auto pair when an iPod/iPhone is connected to this
unit via the USB port.
NOTE: USB Auto-Pairing cannot take place if either
device has been paired previously. Make sure the device
name of both has been deleted from each device.
Setting The BLUETOOTH Device
Select one of five connected BLUETOOTH compatible
devices that you previously registered.
•
Setting item: PAIRED DEV
1. Turn the Rotary encoder to select a Bluetooth compat-
ible device you want to use (you want to change
connection), and then press ENTER.
2. Turn the Rotary encoder to select “CONNECT” to
connect the selected device.
The connected device is marked with “l”. Select “DIS-
CONNECT” to disconnect this device. Select “CLEAR”
when you want to clear the device from the device list.
NOTE:
•
If the connection is successfully changed, “Connected”
is displayed for two seconds and the
indicator
lights up, then the display returns to the SETUP
screen.
•
If a Smartphone is connected to this unit successfully,
the
indicator lights up to show the battery charge
of the connected Smartphone. The indicator
lights up when the battery charge is about 50%, the
indicator lights up when the battery charge is not
enough, and it blinks as a low level warning. The
indicator goes out when the battery is drained.
At this time, the BLUETOOTH function is unavail-
able due to the Smartphone powered off.
•
Indicator (Signal Strength) will display the cur-
rent signal strength of your service provider. The
indicator goes out when the Smartphone is not
in service area or receives no signal.
•
Depending on the connected Smartphone, the (bat-
tery charge), and (signal strength) indicators
may not be displayed.
8
BLUETOOTH HANDS FREE CALLING 83