Alfa Romeo 4C 2017, Руководство пользователя

Страница: 137 / 172

F L U I D S , L U B R I C A N T S , A N D G E N U I N E PA R T S
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant – 1750 Turbo Engine We recommend you use MOPAR Antifreeze/
Coolant 10 Year/150,000 Mile Formula OAT (Or-
ganic Additive Technology) or equivalent meeting
the requirements of FCA Material Standard
MS.90032.
Engine Oil – 1750 Turbo Engine We recommend you use SAE 5W-40 API Certified
Synthetic Engine Oil, meeting the requirements of
FCA Material Standard MS-12991.
Engine Oil Filter – 1750 Turbo Engine We recommend you use MOPAR Engine Oil Filter.
Spark Plugs – 1750 Turbo Engine We recommend you use MOPAR Spark Plugs. *
Fuel Selection – 1750 Turbo Engine Use Only 91 Octane or higher, 0-10% Ethanol.
NOTE:
* The following are essential to ensure correct operation and prevent serious damage to the engine:
only use spark plugs of the same make and type, which are specially certified for such engines that
strictly comply with the spark plug replacement interval given in the maintenance schedule. For
spark plug replacement, it is advisable to contact the dedicated Alfa Romeo Dealership. Refer to
the “Maintenance Schedule” section for the required spark plug intervals.
Chassis
Component Fluid, Lubricant, or Genuine Part
Alfa Twin Clutch Transmission • Gearbox: Full synthetic 75W-85 manual transmission fluid
meeting MS.90021 or FPW9.55550–MZ3 or the API
GL4 specification.
• Control System: Use only MOPAR C Series DDCT SAE 75W
Hydraulic Fluid or equivalent.
Failure to use the correct fluid may affect the function or perfor-
mance of your transmission.
Brake Master Cylinder We recommend you use MOPAR DOT 4 meeting MS.90039. If DOT
4 brake fluid is not available, then DOT 3 is acceptable.
DOT 4 brake fluid must be changed every two years regardless of
mileage.
M A I N T A I N I N G Y O U R V E H I C L E
135