Alfa Plam LUCA 12, Инструкция по эксплуатации и техническому обслуживанию

Страница: 27 / 28

24
2. Remove the four screws that hold the engine smoke.
3.
Tilt the engine smoke to remove it. Given that the engine smoke is connected to the furnace using an
electrical cable, it cannot be removed from the furnace. For this reason, the cleaning activity described below must be
carried out by placing the engine smoke on top of the furnace, with the use of all the necessary precautions (see
diagram).
4.
Using a vacuum cleaner remove all the soot deposited on the stainless steel blade on the engine smoke.
5.
Vacuum up all the soot deposited inside the base of the engine smoke, especially on the left side next
to the stovepipe connector, which must also be cleaned.
CHECK THE SEALS
When performing special maintenance activities at the end of the season, make sure that an authorized person also
checks the door seals and parts that can be removed. Such parts often have to be replaced every three years, depending on
the type of furnace, the intensity of use, etc. Seals must be elastic to the touch and must be replaced if they become totally
glassy.