31369765EN-07
15
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
6.4 Refrigerant connections
All pipework and connections must be made in accordance with good refrigeration design and
installation practice. Ensure that no stresses are transmitted to the pipework. All pipework should be
adequately attached to the walls/ceilings of the cold room and not only to the cooler itself. Pipework
must be adequately supported to prevent vibration or external load on the cooler headers, etc.
Do not adapt headers position to the suction line.
Ensure the supply circuit is closed (no pressure)
before connecting the suction lines.
Open side covers.
Connect the the thermostatic valve (H) to dis-
tributor (I) and the suction line line (L).
Ensure the flame nozzle is not aimed at the
equipment, when welding.
FMC
FMC
L
H
I
L
L
L
