31369765EN-07
28
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
6.15 Insulated suction hood mounting
By default, insulated suction hood is supplied loose and shall be assembled before mounting the
unit to the ceiling.
Support brackets are premounted on the suction
hood sides (one per side).
Remove the bracket central screw. Loosen
the upper and lower screws and slip off the
brackets.
Use the screw wing nuts on the coil side to fix
the brackets on the unit.
Slot the upper and lower screws into the sockets
to place the suction hood. Tighten the screws.
