Alfa Network 30 Next, Инструкция

Страница: 16 / 35

14
5
3
4
• Starting to sew
Raise the presser foot and position the fabric
next to a seam guide line on the needle plate
(5/8˝ [1.6 cm] is most common).
Lower the needle to the point where you
want to start. Lower the presser foot and pull
the threads toward the back. Depress the
foot control.
Gently guide the fabric along a seam guide
line letting the fabric feed naturally.
Straight Stitch
q
Stitch pattern: 1 or 2
w
Presser foot: Zigzag foot
e
Thread tension: 2 to 6
r
Stitch length: 1.5 to 4
t
Stitch width*: 0 or 5
SECTION 3. BASIC SEWING
To Change Sewing Direction
Stop the machine and turn the handwheel
toward you to bring the needle down into the
fabric. Raise the presser foot.
Pivot the fabric around the needle to change
sewing direction as desired.
Lower the presser foot and continue sewing.
q w e
r t
• Finishing sewing
To fasten the ends of a seam, press the
reverse stitch control and sew several
reverse stitches.
Raise the presser foot. Remove the fabric,
draw the threads into the slit
q
on the back
of the presser bar and pull the threads to cut
the threads as illustrated.
q
Slit
NOTE:
Stitch width is applicable to 3 dial model
only.
q