Alfa Laval Unique Mixproof LP, Инструкция по эксплуатации

Страница: 12 / 64

3 Installation
Study the instructions carefully and pay special attention to the warnings!
The valve has ends for welding as standard.
Weld carefully/aim for stressless welding to avoid deformation on sealing areas.
Check the valve for smooth operation after welding.
3.3 Welding
Step 1
Never stick your fingers through the valve ports if the actuator is
supplied with compressed air.
Air
Cutting danger!
2314-0016
Step 2
Dismantle the valve in accordance with step 1, section 5.2
Dismantling of valve.
Step 3
NOTE
Maintain the minimum clearances so that the actuator with the
internal valve parts can be removed - please see later on in this
section!
If there is a risk of foot damage, Alfa Laval recommends to leaving
a distance of 120 mm below the valve (look at the specific built-in
conditions).
B
C
A
2314-0017
12