Alfa Laval Toftejorg SaniMidget SB Series, Инструкция по эксплуатации

Страница: 18 / 28

Maintenance and Repair
Page 16 Instruction Manual, Alfa Laval Toftejorg SaniMidget SB
IM-TE91A720_EN2
Disassembly
Disassemble machine as described on the following pages.
1. Hold one hand under the stator (Pos. 3) of the SaniMidget SB.
Hold hand here
2. With the other hand unlock the clip (Pos. 4) and withdraw it from the holes to loosen the
SaniMidget SB from the down-pipe (for weld-on version: from the connector).
3. Still holding the hand under the stator (Pos. 3), lower the SaniMidget SB free from the down
pipe and remove it from the tank together with the clip (Pos. 4).
4. When out of the tank, turn the Stator (Pos. 3) 90° to allow it to be withdrawn from the
connector (Pos. 1).
This completes the disassembly and the four parts (stator, rotor, connector and clip) of the SaniMidget
SB can be inspected. For the weld-on versions, the connector (Pos. 3) is still on the down pipe and
shall be inspected on the inside by looking down through the straight down-pipe.
Reassembly
Reassembly is carried out according to the installation instruction given on page 9.