7 Technical data
SaniMidget/SaniMagnum/SaniMega SB
7.1
Alfa Laval Toftejorg SaniMidget SB
Surface finish
:
Ra < 0.8 µm (32 µin)
SaniMidget SB 1”: 0.20 kg (0.44 lbs)
Weight of machine
:
SaniMidget SB 1½”: 0.44 kg (0.97 lbs)
Working pressure
:
1 – 3 bar (14.5 – 44 psi)
Recommended pressure
:
2 bar (29 psi)
Max. working temperature
:
95°C (203°F)
Max. sterilisation temperature
:
121°C (250°F)
Max. ambient temperature
:
140°C (284°F)
Wetting radius
:
3 m (9.8 ft)
Impact cleaning radius
:
1.4 m (4.6 ft)
Materials
:
AISI 316L, PEEK 450G (for 3-A version)
:
PEEK w. USP Class VI cert (for UltraPure version)
Lubricant
:
Self-lubricating with the cleaning fluid
Steam or gas (air)
:
Not supported (contact AL for recommendations)
Clip-on 1” BPE US, Clip-on 1½” BPE US
Clip-on 1½” ISO 2037, Weld-on 1” BPE US
Connections
:
Weld-on 1” ISO 2037, Weld-on DN25 DIN Range 1
Dimensions
ID
E
A
B
G
t
4101-0007
Dimensions (mm)
Clip-on
Clip-on
Weld-on
Weld-on
Weld-on DIN
1” BPE US
1½” BPE US
1” ISO 2037
1” BPE US
Range 1 (Ø28)
mm
inch
mm
Inch
mm
inch
mm
inch
mm
inch
ID
25.7
1.012
38.4
1.512
OD
25.0
0.984
25.4
1.000
28.1
1.106
t
1.2
0.047
1.2
0.047
1.2
0.047
1.65
0.065
1.2
0.047
B
42.0
1.653
54.7
2.154
42.0
1.653
42.0
1.653
42.0
1.653
A
84.8
3.338
118.3
4.659
104.8
4.126
104.8
4.126
84.8
3.338
Ø-clip
4.0
0.157
4.0
0.157
4.0
0.157
4.0
0.157
4.0
0.157
G
4.1
0.161
4.1
0.161
4.1
0.161
4.1
0.161
4.1
0.161
E
15.0
0.590
25.4
1.000
Important
information:
The SaniMidget SB Weld-on versions only continue to meet the requirements of the 3-A Sanitary Standard
78-##, if the installation makes visual inspection of all liquid contacts surfaces possible. See Installation
instructions on page 14.
28