3 Installation
Study the instructions carefully and pay special attention to the warnings!
SolidC is with impeller screw as standard.
Check the direction of rotation of the impeller before operation.
- See the indication label on the pump.
3.3
Pre-use check
Step 1
Never start in the wrong direction of rotation with liquid in the
pump.
1. Start and stop the motor momentarily
2. Ensure that the direction of rotation of the motor fan is
clockwise as viewed from the rear end of the motor.
See indication label!
Correct
TD 241-013/1
Rear view of motor
3.4
Recycling information
• Unpacking
-
Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.
-
Wood and cardboard boxes can be reused, recycled or used for energy recovery
-
Plastics should be recycled or burnt at a licensed waste incineration plant
-
Metal straps should be sent for material recycling
• Maintenance
-
During maintenance oil and wear parts in the machine are replaced
-
All metal parts should be sent for material recycling
-
Worn out or defective electronic parts should be sent to a licensed handler for material recycling
-
Oil and all non metal wear parts must be taken care of in agreement with local regulations
• Scrapping
-
At end of use, the equipment shall be recycled according to relevant, local regulations. Beside the equipment itself, any
hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in the
absence of local regulations, please contact the local Alfa Laval sales company.
9
